Featured

Under Construction

I started this site in 2014, almost six years ago and since that time I’ve almost died in the hospital two separate times and acquired two Riso machines and a large format screen press. We’re growing, despite our lack of interest in maintaining an internet presence. 

I’ve almost always relied solely on word of mouth promotions. Homies, business acquaintances, and strangers have all contributed to my work in their support and encouraging words. I’m forever thankful for your help, whoever you are.

We’ll be updating our site with a collection of past work, new work, and future projects for the upcoming year. 

Stay tuned! 

Riso EZ 220U

I drove through a tornado producing thunderstorm on a dirt road south of Waco to pick up and transport this Riso EZ 220U. Nothing will stop us! Currently, we only have one black Legal size drum but we’re on the lookout for more color drums.

Once I get a studio space, this machine will be joining my RP3700 in destroying paper.

Peavey Series 400 Musician

I found another Peavey amp after I got out of the hospital that I cleaned up with some Deoxit and alcohol. I still haven’t completely finished this one, I took mainly reference photos of wiring for future purposes. The mica washers were cracked and thermal paste was all dry so I purchased more off eBay. One day I’ll buy new power transistors and a transformer, and possibly re-shell it in Pecan wood (cause I’m Texan and all.)

Ampeg Olympian ST-25

I acquired this amp in 2009 when I first moved to the DFW metro. I didn’t have an amp as a result of a series of bad choices at the pawn shop so I went out in search of something cheap. I found this beast and immediately fell in love with solid state. I used it for years, but it had problems with the tremolo unit that were beyond my ability to repair. To prevent any further damage from happening, I sold it to a collector who would take the time to restore it.

There aren’t very many photos of these online, so here you go.

Replacing the Master Removal Belts on a Riso RP-3700

I recently went to the hospital after experiencing another seizure and took the following week off to recover a bit. The entire ordeal has been intense both physically and mentally. I felt like I ran an entire marathon and nothing smelled or tasted the same way as I remembered before my seizure. It’s bizarre and emotionally draining.

I had to take a week off of work and stay home, so I decided to start working on the repair issues I had on my Riso RP 3700. I’m obsessed with finding broken equipment and fixing it. My garage is FULL of guitar amps which I have found and fixed. I’ll post about that later.  I found this duplicator and brought it home to start making fun prints but immediately began having master disposal errors and jams any time there was more than two masters in the disposal tray.  After reading around on forums I found the right parts and bought the new belts and followed the guide on stencil.wiki. I asked the wonderful people on the Riso FB group for some tips and after two hours of slow and cautious work, I was done!

IMG_3760IMG_3761IMG_3762IMG_3766IMG_3767

I purchased a pair of circlip pliers from Harbor Freight and let me tell you, it made the job a hell of a lot easier than using a small screw driver. No flying circlips, no lost parts.

IMG_3774IMG_3776IMG_3777IMG_3780IMG_3785

After I put it all back together, I made a test master and it worked! No jamming master sheets.

IMG_3788

The Rise of Riso in North Texas

Over the past year I’ve been traveling around the Texas hill country and acquiring some new tools. Our two latest acquisitions are these two Riso spot color duplicator machines.

Say hello to Riso RP 3700 & EZ 220U!

IMG_3755

These are fairly rare machines to come across. Imagine a printing machine that blends two classical print methods; mimeograph and screen printing. It works like a xerox, but instead of toner it uses super vibrant, transparent, soy based ink. Best of all, a Riso can print on varying paper stocks; from newsprint to heavy French paper, this thing can handle it. You create a master image using the scanner, a laser burns a fabric master which then wraps around the ink drum and a pressure roller presses the un-coated paper against the drum, making a perfect transfer. Since each color is printed as a separate image, the paper is ran multiple times through the machine, layering each color and creating beautiful gradients. These are truly beautiful and brilliantly designed machines.

IMG_1409IMG_3736

AWT AccuPrint AP-2538

IMG_2217

A few years ago we started restoring an AWT AccuPrint AP-2538. The entire machine was rusted over when we first found it, still functional, but very dirty.

IMG_2218IMG_2224IMG_2223IMG_2986.JPG

After almost destroying it during transport (oops) we unloaded it into our print shop and started taking it apart. Using white vinegar, I de-rusted every piece of metal I could fit into a bucket. I sat in my garage and listened to music, and just scrubbed away.  It probably took me about three weeks to finish scrubbing and rehydrating the metal and plastic in mineral oil.

NFJX9890IMG_2916IMG_2938IMG_2231IMG_1525NRBM8566

We put it back together and it looked absolutely beautiful!

IMG_3195IMG_3198IMG_3194